BrickStyle 3D Brick Wall Panel – Peel and Stick Faux Brick Wallpaper

3D Brick Wall Panels for a Stylish Home Makeover

Give your walls a fresh, modern look with the BrickStyle 3D Brick Wall Panel. Designed with a raised brick pattern, this peel-and-stick faux brick wallpaper adds texture and character to plain walls without the cost and mess of traditional brickwork.

Made from soft XPE foam, these 3D brick wall panels are lightweight and easy to cut to size. The self-adhesive backing makes installation simple, making them a practical option for DIY home décor projects.

Why Choose BrickStyle Faux Brick Wall Panels?

Realistic 3D Brick Texture

The raised brick design adds depth and visual interest, helping you create a decorative feature wall in your home.

Peel-and-Stick Installation

The self-adhesive backing makes application straightforward. Clean and dry the surface, peel off the backing film, position the panel, and smooth it down to reduce air bubbles.

Soft XPE Foam Material

Made from 3.5mm XPE foam, these decorative wall panels offer a lightweight alternative to traditional brick finishes.

Waterproof and Easy to Clean

The product is described as waterproof and moisture-resistant. Follow the care instructions and check surface suitability before installing it in areas exposed to frequent moisture.

Multiple Colors and Roll Sizes

Choose from the available colors and roll lengths to suit your decorating project. Check the product options to select the size you need.

Where Can You Use 3D Brick Wall Panels?

Use these brick faux wall panels to refresh a living room, bedroom, TV wall, sofa background, dining area, home office, or another suitable indoor space. They can help create an accent wall or add a brick-inspired look to a plain surface.

Available Sizes and Coverage

The listed roll width is 70cm. Approximate coverage varies by length:

• 70cm × 1m: approximately 0.7 m² (7.5 sq ft)
• 70cm × 2m: approximately 1.4 m² (15 sq ft)
• 70cm × 5m: approximately 3.5 m² (37.7 sq ft)
• 70cm × 10m: approximately 7 m² (75 sq ft)

Measure your wall's width and height to calculate the area you need to cover. Allow around 10% extra for trimming and fitting. Actual dimensions may vary by 1–3cm due to manual measurement.

How to Install Your Peel-and-Stick Brick Wallpaper

1. Clean the wall or application surface thoroughly and allow it to dry.
2. Measure the area and plan the panel placement.
3. Peel off the adhesive backing film.
4. Align the panel carefully and press it onto the surface.
5. Smooth out air bubbles and trim the edges as needed.

For best results, use a clean, smooth, dry surface. Test a small area first, especially on painted or delicate walls, because removing adhesive panels may affect some finishes.

Frequently Asked Questions

What are 3D brick wall panels?

They are decorative wall coverings with a raised brick pattern that gives a wall a textured, brick-inspired appearance without installing real bricks.

Do I need extra glue to install these panels?

The panels have a self-adhesive backing, so additional glue is intended not to be necessary when installed as directed.

Can I cut the panels to fit my wall?

Yes. The XPE foam panels can be trimmed to size. Measure carefully and use a suitable cutting tool safely.

How much area does one roll cover?

Coverage depends on the selected length. A 70cm × 1m roll covers approximately 0.7 m², while a 70cm × 10m roll covers approximately 7 m².

Can I install these panels in a kitchen or humid room?

The product is described as waterproof and moisture-resistant. Check the installation instructions and suitability for your intended location before use.

Can I remove the panels later?

Removal may affect painted or delicate surfaces. Test a small area first and peel slowly if you need to remove a panel.

Will the color look exactly like the pictures?

Colors may appear slightly different depending on screen settings and lighting conditions.